BCD to DEC converter manual
This converter/decoder BCD to DEC is a simply but very powerful device. It decode from BCD data to one of eight. You can use it everywhere you have less wires than you need. You need only 4 wires and control up to 8 outputs. You can supply external relays over the BCD data wires. There is universal output driver. You can drive outputs by switching to GND or + Vcc voltage. BCD inputs include RF and high voltage protection.
Jump to
Applications
BCD to DEC
Schematic
PCB
Applications
Matrix table for inputs and outputs
Connection example 1
- without external power voltage wire
- less wires
- for fat wires or smaller distance
Connection example 2
- with external power voltage wire
- one more wire
- BCD wires can use smaller voltage > 9 V
- for longer distance
Output 0 to 8
- compatible with MFJ antenna switch
- easy to set by jumper
Output driver
- universal outputs - switching to GND or + voltage
- easy to se by jumper
- easy to replace driver ULN (- out) / TBD (+ out)
Example with 6-to-1
- need four (five) wires between controller and BCD to DEC converter
- GND, (+12V) and three control wires
- output must be with TBD driver (+ out)
Example with 4-to-1
- need three (four) wires between controller and BCD to DEC converter
- GND, (+12V) and three control wires
- output must be with TBD driver (+ out)