271.04 €
(tax incl.)
High Power 6-to-1 antenna switch - six outputs to one input.
6-to-1 antenna switch KIT
High Power 6-to-1 antenna switch - six outputs to one input.
83.49 €
(tax incl.)
83.49 €
69.00 € (without tax)
69.00 € (without tax)
Brand:
Add to compare0
Love
Add to wishlist(2)
This is high power six way switch. It can handle up to 4 kW. You can use it for bank of filters or antenna switching.
Using
- Six port antenna switch
- You can use two pieces for switching bank of six filters
Main functions
- Six outputs to one input
- Frequency range DC-60 MHz
- Characteristic impedance 50 Ohm
- Power rating DC to 30 MHz
- 3 kW continue wave
- 4.5 kW PEP (SWR < 1:1.7) - tested with OM-4000
- 50 MHz 1.5 kW
- High quality PCB thickness 2 mm
- High quality connectors
- Disconnect outputs are shorted
- You can use 2 pieces also for BPF switching
- When no voltage is applied to the switch all antenna and output ports are grounded
- Stainless screws
- PCB size 170x95 mm
- KIT VERSION
Parameters
- High Power up to 4 kW
- Low loss and good isolation
- Switching by +12 V max. 200 mA
Available as
KIT: all parts + PCB (without AL box)
ASSEMBLED: ready to use - ASSEMBLED VERSION
PCB: only PCB
Connectors: PL SO-239
KIT contains
- PCB
- connectors PL SO-239
- relays
- resistors
- capacitors
- varistors
- diodes
- LED diodes
- 2-pole wagos
- fasteners (screws, nuts, washers, spacer bolts)
- wires
- paper drilling template
Manual
If you want to know more please check our wiki with 6-1 switch manual.
version with PL SO-239 connectors
 |
Example with BCD to DEC
- need four (five) wires between controller and BCD to DEC converter
- GND, (+12V) and three control wires
- output must be with TBD driver (+ out)
Example with BCD to DEC TTL
- need three (four) wires between controller and BCD to DEC converter
- GND, (+12V) and three control wires
- output must be with TBD driver (+ out)
This antenna switch can be controlled by our Easy Controller
Data sheet
- type
- KIT
- design
- pcb module
- usage
- RX + TX
- impedance
- both 50 & 75 Ohm
- front-end protection
- none
- frequency range
- DC to 60 MHz
- PCB dimensions
- 170x95 mm
- product weight (brutto)
- 0.43 kg
- package dimensions
- 22x14.5x4 cm
Specific References
- ean13
- 1000090108487
You may also like
35.09 €
(tax incl.)
PCB for High Power 6-to-1 antenna switch - six outputs to one input.
62.92 €
(tax incl.)
Simply but powerful converter/decoder from BCD data to one of eight. You can use it everywhere you have less wires than you need.
68.97 €
(tax incl.)
Simply but powerful converter/decoder from BCD data in TTl logic to one of eight. You can use it everywhere you have less wires than you need.
199.65 €
(tax incl.)
This is Easy Controller for 6-to-1 antenna switch. You can control any antenna switch with 6 inputs. Including PTT hot switch protection. You can choose between two versions: classic and remote. Remote version allows...
Leave a review