Menu
Click for more products.
No produts were found.

PCBs for Single wire beverage on ground

Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.

Read more
Brand:
Add to compare0
Love
Description

These PCBs are for Single wire beverage BOG antenna - it is a long wire antenna installed very close to the ground. The antenna should be longer than 1 wavelength and installed at a height of less than 0.05 wavelength above ground - on the ground for this model. The beverage is usually terminated in a resistance at the end (opposite the feedpoint). Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.


Using

  • Low band receiving antenna
  • Lower noise, better directivity
  • Can be part of phased array
  • BOG = Beverage On Ground

Main functions

  • Broadband 0.1 to 30 MHz 
  • Single directional
  • Low noise
  • Beverage element is on the ground
  • Protections - high voltage/current
  • Termination resistance selectable in three steps
  • Electrostatic protection with neon lamps
  • High power protection
  • ONLY PCBs

Parameters

  • Coax impedance 50 or 75 Ohm (internal jumper)
  • Beverage element (wire) is directly on ground - no supports needed
  • PCB size feeder 50x25 mm, terminator 50x33 mm

Available as

KIT: all parts + PCBs and IP56 boxes - KIT VERSION
ASSEMBLED: ready to use - ASSEMBLED VERSION

Manual

If you want to know more please check our wiki with Single wire beverage on ground manual.



example of assembled feeder PCB

single wire bog assembled pl qro.cz hamparts.shop



example of assembled terminator PCB

single wire bog terminator qro.cz hamparts.shop



block diagram

single wire bog by qro.cz hamparts.shop



example of right configuration with CMCC

single wire classic right configurarion by qro.cz hamparts.shop



typical SWR

measure single wire bog qro.cz hamparts.shop

Read more
Product Details

Data sheet

version
ONLY PCB
usage
RX
impedance
both 50 & 75 Ohm
front-end protection
output
frequency range
0.1 MHz to 30 MHz
Reviews
No comments

Leave a review

  • satisfaction:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
Related products
This is 2 element beverage antenna array. In this End-Fire array the beverage antennas are very close to each other. Usually 2 to 6 meters. One beverage is shifted to front by the stagger distance. This array needs...
Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.
Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.

Home

Settings

Click for more products.
No produts were found.

Menu

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in