×

Single wire beverage CLASSIC

Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.

Read moreShow less
Limited time offer:
77.65 € (tax incl.) 83.49 €
83.49 € 77.65 €
64.17 € (without tax) 7%
connector
  • F
  • N
  • PL
in stock, shipped in 2-3 days

Price history     Price history

The lowest price in the 30 last days was 77.65 €

Brand:
Add to compare0
Love
Add to wishlist
Description

This Single wire beverage classic is a long wire antenna installed very close to the ground. The antenna should be longer than 1 wavelength and installed at a height of less than 0.05 wavelength above ground. The beverage is usually terminated in a resistance at the end (opposite the feedpoint). Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.


Using

  • Low band receiving antenna
  • Lower noise, better directivity
  • Can be part of phased array

Main functions

  • Broadband 0.1 to 30 MHz 
  • Single directional
  • Low noise
  • Protections - high voltage/current
  • Termination resistance selectable in three steps
  • 50/75 Ohm feed line - easy jumper switch
  • Common-mode coax choke included
  • Electrostatic protection with neon lamps
  • High power protection
  • Stainless screws
  • High quality connectors
  • IP56 boxes - recommended to protect it against water
  • Feeder size 100x100 mm
  • Terminator size 64x58 mm
  • ASSEMBLED VERSION

Parameters

  • Coax impedance 50 or 75 Ohm (internal jumper)
  • Construction as you need

Available as

ASSEMBLED: ready to use
KIT: all parts + PCBs and IP56 boxes - KIT VERSION
Connectors: PL SO-239 or F or N
PCB: only PCBs

Included in package

Single wire box assembled and tested
Single wire terminator assembled and tested


Manual

If you want to know more please check our wiki with Single wire beverage classic manual.



version with PL SO-239 connector

single wire classic assembled pl qro.cz hamparts.shop



version with F connector

single wire classic assembled f qro.cz hamparts.shop



version with N connector

single wire classic assembled n qro.cz hamparts.shop



assembled version of terminator

single wire classic terminator qro.cz hamparts.shop



block diagram

single wire classic by qro.cz hamparts.shop



example of right configuration with CMCC

single wire classic right configurarion by qro.cz hamparts.shop



typical SWR

measure single wire bog qro.cz hamparts.shop



recommendations to buy rx audite sdr splitter switch by qro.cz hamparts.shop



Read moreShow less
Product Details

Data sheet

type
ASSEMBLED
design
in enclosure
usage
RX
impedance
both 50 & 75 Ohm
front-end protection
output
frequency range
0.1 MHz to 30 MHz
product dimensions
65x58x35 mm - PU box IP56
100x100x50 mm - PU box IP56
PCB dimensions
50x25 mm
50x33 mm
product weight (brutto)
0.42 (F), 0.44 (PL, N) kg
package dimensions
18.5x14x10.5 cm

Specific References

ean13
1000090097088
Reviews
No comments

Leave a review

  • rating:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
You may also like
235.95 € (tax incl.)
This is 2 element beverage antenna array. In this End-Fire array the beverage antennas are very close to each other. Usually 2 to 6 meters. One beverage is shifted to front by the stagger distance. This array needs...
77.65 € (tax incl.) 83.49 €
Special offer
Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.
44.93 € (tax incl.) 56.87 €
Special offer
Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.
44.93 € (tax incl.) 56.87 €
Special offer
Beverage antennas provide one of the least expensive and most reliable ways to improve DX capabilities on the low frequencies.

manuals

Home

Settings

Menu

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in