2EL End-Fire beverage antenna array BOG

This is 2 element beverage antenna array. In this End-Fire array the beverage antennas are very close to each other. Usually 2 to 6 meters. One beverage is shifted to front by the stagger distance. This array needs smaller room compare to broadside one. Big advantage is in higher F/B.

Using

Very low noise low band RX antenna
Improvement in F/B
Higher gain
Nulls in the calculated direction

Main functions

Broadband: 0.1 MHz to 30 MHz
In right configuration works 160 to 40m
Gain around +2.5 dB compare to single wire beverage
Great F/B compare to single wire beverage
Can null some direction by PH line calculation
Very low noise
50/75 Ohm feed line - easy jumper switch
Antenna construction with wires on the ground (BOG)
Contains: 2x Single wire beverage (feeders and terminators) + 2-way splitter BOX
One single wire beverage with 180 deg phase shift in feeder
Common-mode coax choke included
Electrostatic protection with neon lamps
High power protection
Stainless screws
High quality connectors
IP56 boxes - recommended to protect it against water
Feeder size 100x100 mm
Terminator size 64x58 mm
ASSEMBLED and TESTED VERSION

Parameters

Gain around +2.5 dB compare to the single wire beverage
More examples in wiki manual
Impedance 50 or 75 Ohm by internal JUMPERs
Splitter with 0 deg
Flat SWR when right terminated
Protections maximal current continues 100 mA
Protections maximal voltage around 65 V

Available as

ASSEMBLED BOG: ready to use
ASSEMBLED CLASSIC: ready to use - CLASSIC VERSION
PCBs: only PCBs for 2-way splitter BOX and Single wire classic or Single wire BOG
Connectors: PL SO-239 or F