2-way splitter box
The splitter or combiner is a very useful device. It can provide equal voltages, equal current, or equal power to matched or unmatched loads.
67.00 € (without tax)
This 2-way splitter is a very useful device. It can provide equal voltages, equal current, or equal power to matched or unmatched loads. Like all passive splitters and combiners, this device is less than ideal. Isolation is maximum only when at least one port are properly terminated. In this case isolation between the two splitted/combinated ports is maximum when the main port is properly terminated. This HW is designed only for RX line. There are some more high current and voltage protections on all ports. Both impedances 50 or 75 Ohm can be selected by the jumper.
Using
- Antenna splitter
- RX signal divider
- One antenna, two RX
Main functions
- Broadband: 0.1 MHz to 60 MHz
- Splitter or Combiner
- Low loss
- Protections - high voltage / current
- 50 / 75 Ohm impedance - easy jumper switch
- Electrostatic protection by neon lamps
- High power protection
- stainless screws
- Quality connectors
- IP56 box - recommended to protect it against water
- Feeder size 100x100 mm
- ASSEMBLED AND TESTED VERSION
Parameters
- Impedance 50 or 75 Ohm
- Insert loss: around 0.5 dB
- Split 3 dB, together with IL around 3.5 dB
- Isolation more than 30 dB, 160-15m more than 40 dB
- SWR on splitted ports better than 1 : 1.1 on HF, resp. 1 : 1.19 on 6m
- SWR on main port around 1 : 1.3 on HF, resp. 1 : 1.4 on 6m
- Maximal current continue 100 mA
- Maximal voltage around 65 V
Available as
ASSEMBLED: ready to use
ASSEMBLED SMD version: only PL-SO 239 connector - ready to use - SMD VERSION
KIT: all parts + PCB and IP56 box - KIT VERSION
PCB: only PCB
Connectors: PL SO-239 with adapters to F or F
Included in package
Splitter assembled and tested
Manual
If you want to know more please check our wiki with 2-way splitter box manual.
version with F connectors
RX antenna splitter for the two RX
RX antenna combiner for 2el Beverage array
RX antenna combiner for 2el end-fire array
Isolation and SWR on splitted ports
SWR on main port and Insert loss
Data sheet
- type
- ASSEMBLED
- design
- in enclosure
- usage
- RX
- impedance
- both 50 & 75 Ohm
- front-end protection
- input and output
- frequency range
- 0.1 MHz to 60 MHz
- product dimensions
- 100x100x50 mm - PU box IP56
- PCB dimensions
- 95x95 mm
- product weight (brutto)
- 0.26 (F), 0.35 (PL), 0.4 (ADAPT F) kg
- package dimensions
- 18.5x14x10.5 cm
Specific References
- ean13
- 1000090096289