2-way small splitter with bypass KIT
The splitter or combiner is a very useful device. It can provide equal voltages, equal current, or equal power to matched or unmatched loads.
28.00 € (without tax)
This 2-way small splitter is a very useful device. It can provide equal voltages, equal current, or equal power to matched or unmatched loads. Like all passive splitters and combiners, this device is less than ideal. Isolation is maximum only when at least one port are properly terminated. In this case isolation between the two splitted/combinated ports is maximum when the main port is properly terminated. This HW is designed only for RX line. There are some more high current and voltage protections on all ports. Both impedances 50 or 75 Ohm can be selected by the jumper.
Using
- Antenna splitter
- RX signal divider
- One antenna, two RX
Main functions
- Broadband: 0.1 MHz to 60 MHz
- Splitter or Combiner
- Bypass IN to RX1
- Low loss
- Protections - high voltage / current
- 50 / 75 Ohm impedance - easy jumper switch
- Electrostatic protection by neon lamps
- High power protection
- Quality SMA connectors
- KIT VERSION
Parameters
- Impedance 50 or 75 Ohm
- Insertion loss: around 0.5 dB
- Bypass IN-RX1 without supply voltage
- Splitter switches ON with +12 V voltage to JP2
- Split 3 dB, together with IL around 3.5 dB
- Isolation more than 30 dB, 160-15m more than 40 dB
- SWR on splitted ports better than 1 : 1.1 on HF, resp. 1 : 1.19 on 6m
- SWR on main port around 1 : 1.3 on HF, resp. 1 : 1.4 on 6m
- Maximal current continue 100 mA
- Maximal voltage around 65 V
Available as
KIT: all parts + PCB
ASSEMBLED: ready to use - ASSEMBLED VERSION
PCB: only PCB
KIT contains
- PCB
- SMA connectors
- binocular cores
- relays
- neon lamps
- resistors
- capacitors
- PTC resettable fuses
- diode
- pin header, jumper
- Cu wire
⚠ IMPORTANT NOTE: THIS PRODUCT IS A KIT - you have to assemble it by yourself!
Manual
If you want to know more please check our wiki with 2-way small splitter with bypass manual.
Bypass relay
RX antenna splitter for the two RX
RX antenna combiner for 2el Beverage array
RX antenna combiner for 2el end-fire array
Isolation and SWR on splitted ports
IN/OUT to port 1
IN/OUT to port 1 - bypass
Data sheet
- type
- KIT
- design
- pcb module
- usage
- RX
- impedance
- both 50 & 75 Ohm
- front-end protection
- input and output
- frequency range
- 0.1 MHz to 60 MHz
- PCB dimensions
- 68x50 mm
- product weight (brutto)
- 0.09 kg
- package dimensions
- 12x10.5x4.5 cm
Specific References
- ean13
- 1000090101051