PCB for 4-way switch for Bi-directional beverages
This is PCB for two port antenna switch - middle box between pair of Bi-Directional antennas with single coax output.
14.00 € (without tax)
This PCB is for 4-way RX antenna switch - it is in the middle box between the pair of Bi-Directional antennas with single coax output. It allows you to control ALL 4 directions over one coax cable. Directions are controlled by voltage over the coax (0, +12V, -12V and AC).
Using
- Four direction beverage system classic version and remote version
- Four direction RX antenna with two Bi-Dir antennas - example
Main functions
- 4-way switch for RX antenna
- Broadband - 0.1 to 50 MHz
- 50 or 75 Ohm feed line version
- Common-mode coax choke included for OUTPUT port
- Electrostatic protection with neon lamps
- ONLY PCB
Parameters
- Control voltage up to 15 V AC/DC
- Maximal current up to 300 mA
- Insertion loss less than 0.5 dB
Available as
KIT: all parts + PCB and IP56 box - KIT VERSION
ASSEMBLED: ready to use - ASSEMBLED VERSION
Manual
If you want to know more please check our wiki with 4-way switch for Bi-directional beverages manual.
⚠ IMPORTANT NOTE: This switch is controlled by NEGATIVE VOLTAGE - 12 V or AC
example of assembled PCB
example with Bias tee and Bi-dir antennas
Data sheet
- type
- ONLY PCB
- design
- bare pcb
- usage
- RX
- impedance
- both 50 & 75 Ohm
- front-end protection
- none
- frequency range
- 0.1 MHz to 50 MHz