I purchased an RX Audite to use with an ANAN SDR that has dual independent receive channels. I had previously attempted to use two other SDR T/R switches from much better known manufacturers.

All I can say is that the RX Audite is far superior in concept, design, and manufacture. In particular it is the first switch of this type I have tried that has sufficient transmit isolation that it is transparent in operation, you can switch it on and then it just works perfectly. Five stars recommended!

Ciao Jan!
All work fine!!!!!!!!!!!
Using my amplifier with 1kW non problems!!!
Perfet band control!
Is stable and fine!
Thank you so much!
IZ7KHR love my BCD Splitter !!!

the photo of the new Bidir. BOG. I put this 20cm high from ground, long 90mt.

73 and tnx for all

IZ8JAI Dom

Tested in the PA-100D amplifier, these toroids are close to genuine Micrometals. They work just fine and are within specs! recommended! vy 73 de yo6tjj

Quality adapters! vy 73 de yo6tjj

Very good power supply! Works just fine for our IC-7300

Hello Jan.

Now I am - more or less - ready with the installation and I send you attached to this email some pics. My TRX is TS-850 which is switching only the 6-to-1 controller.

Some small things are still to do. But this is only luxury work: Normally I don't change the antenna during transmitting... ?

RJ45 or D-SUB 15 for antenna switching? I selected the D-SUB 15 solution, because this seems for me more robust and the connector can be fixed at the housing with two screws.

So, everything works fine. Finally I can say, thank you very much for this nice switching box and the controller. Good work and I will recommend you. On my QRZ page https://www.qrz.com/db/df5en I already put in some links to QRO.cz and hamparts.shop.

Vy 73
Dieter
DF5EN

Many thanks again for the quick development of the new product. It's working like a charm and I'm very happy with it. I tested it with 3 Transceiver: IC-705 / FT-DX10 and TS-890 simultaneously. Worked all flawless and without a issue like I expected it.

Content: Your 75 Ohm box works excellent, with the coax laid under the ground is now really perfect. And with the new K9AY++ which I use almost only for Asia, I now have an extremely good station - and antennas that I can use all year.

Thanks for everything!!!

i'm a very happy user of your SDR Splitter and can't say enough how I'm happy with it; It's saved countless QSO on 6m when my FT2000 alone is unable to decode anything. I'm used to have 2 different instances of JTDX, one running with my old FT2000 and the other one using a Colibri-NANO SDR. Of course while using the same antenna, so this is where the SDR Splitter is really wonderful. The Preamp is working like a charm, I thought I would never use it, in the end, it's always On. Brillant and reliable product, using it for more than 8 months now. Would recommend to anyone

Your products are excellent! I can also recommend your Single wire beverage/BOG antenna box. Very well manufactured and with very good options regarding the termination resistance and feedline impedance (50/75 Ohm). Also we (DP9A) successful use your Antenna one to two STACK MATCH.

I bought the RX AUDITE SDR SPLITTER/SWITCH from WIMO, and i am impressed. i don't understand why this beautiful product has no comments at eham.net. So I open a new category at eham.net with your beautiful product and I left my very best comment.

You can see it here: https://www.eham.net/reviews/view-product?id=15490

I don't use inband antenna. I use RSP1A with SDRUNO. I didn't move any jumpers inside. I left it as is from WIMO. I bought the preamp version. It works wonderful. I am electronic engineer, I work at Hellenic Civil Aviation, at Santorini airport, and when I examined how you had constructed the item I was impressed. Space technology compared to others. RX AUDITE was my oneway to my shack.

Nice twisted wire, used for bidirectional beverages, thiny but very ressistant, very ligth, perfect for example in field day or dxpeditions, also could use for permanent installation.

Hi Jan, first of all, my RX-Audite worked perfect during the last contest feeding my RSP1A SDR with CW-Skimmer. No overload, perfect switching. Love this little thing :-)

Something to do on a Sunday afternoon while it's raining outside all day. The preamplifier and the BIAS-T are already soldered. Remoteqth.com & QRO.cz kits are always fun to assemble. You could also buy them complete, but that way you also have a sense of achievement.

Something to do on a Sunday afternoon while it's raining outside all day. The preamplifier and the BIAS-T are already soldered. Remoteqth.com & QRO.cz kits are always fun to assemble. You could also buy them complete, but that way you also have a sense of achievement.

The beverages work GREAT!!!!!!

No noise on them, but the best was the “diagram”, in my case, if I selected the NA beverage, it eliminates the signals coming from EU, nice F/B of around 20db but better F/S of at least 25/30db!!!!!! Its normal??????? Both of them are about 250m, in the ground just aluminium pipe of around 1m, no radials, the ground was complety wet and mud.

We used RX Audite throughout WW CW and it worked wonderfully. Congratulations! Nice equipment!! We use a single SDR RSP1A + CW Skimmer Server + Aggregator. Despite the SDR only working on 3 bands at the same time and the old notebook (I7 second generation + 8GB of RAM) we didn't notice a loss of performance and the information arrived in great quantity/quality. We had a quality leap in the multiplier hunt. Now let's calmly study what we will do to improve what we already have based on what was observed during the contest.

AWESOME!

really great product and construction, I recommend this beverage.

GREAT SUPPORT

I wasn't sure what to buy but Jan advised me well. Everything works and I'm satisfied and recommend.