93.17 €
(tax incl.)
77.00 €
(without tax)
High Power 6-to-1 antenna switch - six outputs to one input.
6-to-1 IND-I antenna switch
High Power 6-to-1 antenna switch - six outputs to one input. For indoor installation
271.04 €
(tax incl.)
271.04 €
224.00 € (without tax)
224.00 € (without tax)
Brand:
Add to compare0
Love
Add to wishlist
This is High Power six way RF switch. It is designed to be placed either indoors or outdoors in an additional protective box. The IND-I versions include a fan with a dust filter to improve cooling when installed indoors. This is a good idea when using higher power and digital operations. The fan can be disconnected (not recommended) or set to one of two speeds. The factory setting is slow speed. Switch is controlled by positive voltage.
It can handle up to 4 kW. You can use it for bank of filters or antenna switching.
Using
- Six port antenna switch
- One antenna to six TRX
- You can use two pieces for switching bank of six filters
Main functions
- Six outputs to one input
- Frequency range DC to 70 MHz
- Characteristic impedance 50 Ohm
- Power rating DC to 30 MHz
- 3 kW continue wave
- 4.5 kW PEP (SWR < 1:1.7) - tested with OM-4000
- 50 MHz 1.5 kW
- 70 MHz 0.5 kW
- High quality PCB thickness 2 mm
- Controlled by positive voltage
- Control voltage 12 ~ 14 VDC
- Control current up to 0.2 ADC
- Power consumption < 3 W
- Disconnect ports are shorted
- Common port also shorted when switch is OFF
- Fan with dust filter
- Two fan speeds
- High quality connectors
- Aluminium shield enclosure
- AL box size 240x125x85 mm (with connectors)
- Stainless screws
- ASSEMBLED and TESTED VERSION
Parameters
- High Power up to 4 kW
- Frequency range DC to 70 MHz
- Low loss and good isolation
- SWR better than 1:1.1 @ 30 MHz, 1:1.2 @ 50 MHz
- With 1:1.3 at 70 MHz
- Very low Insertion Loss
- Isolation 50 to 70 dB @ 30 MHz depends on port
- Control voltage 12 ~ 14 VDC
- Controlled by positive voltage
- Switching by +12 V max. 200 mA
Control cable recommendations
You can use copper CAT-5 cable up to 50m. For greater distance we recommend 0,75mm square and more.
Available as
ASSEMBLED: ready to use
RECOMMENDATIONS TO BUY:Included in package
Switch assembled and tested
Manual
If you want to know more please check our wiki with antenna switch 6-to-1 IND-I manual.
Example with BCD to DEC
- need four (five) wires between controller and BCD to DEC converter
- GND, (+12V) and three control wires
- output must be with TBD driver (+ out)
Example with BCD to DEC TTL
- need four (five) wires between controller and BCD to DEC converter
- GND, (+12V) and three control wires
- output must be with TBD driver (+ out)
This antenna switch can be controlled by our Easy Controller
Data sheet
- type
- ASSEMBLED
- design
- in enclosure
- usage
- RX + TX
- impedance
- 50 Ohm
- front-end protection
- none
- frequency range
- DC to 70 MHz
- product dimensions
- 240x125x85 mm
- product weight (brutto)
- 1 kg
- package dimensions
- 27.5x22.5x9.5 cm
You may also like
289.19 €
(tax incl.)
239.00 €
(without tax)
High Power 6-to-1 antenna switch - six outputs to one input.
62.92 €
(tax incl.)
52.00 €
(without tax)
Simply but powerful converter/decoder from BCD data to one of eight. You can use it everywhere you have less wires than you need.
68.97 €
(tax incl.)
57.00 €
(without tax)
Simply but powerful converter/decoder from BCD data in TTl logic to one of eight. You can use it everywhere you have less wires than you need.
68.97 €
(tax incl.)
57.00 €
(without tax)
Simply but powerful converter/decoder from BCD data input to 16 outputs, compatible with Yaesu BCD. You can use it everywhere you have less wires than you need and also with BCD (TTL) output devices (like Microham).
193.60 €
(tax incl.)
160.00 €
(without tax)
This is Easy Controller for 6-to-1 antenna switch. You can control any antenna switch with 6 inputs. Including PTT hot switch protection. You can choose between two versions: classic and remote. Remote version allows...