Stack Match 1-3
Antenna stack match with two or three outputs.
292.82 €
(tax incl.)
292.82 €
242.00 € (without tax)
242.00 € (without tax)
Brand:
Add to compare0
Love
Add to wishlist
This stack match 1-3 is designed for impedance match two or three antennas (PA) to one TRX. All outputs are in phase. You can match two or three antennas at the same tower or use it as a Multi Beaming - antennas to different directions. It will provide the user with all combinations of antenna selection. Could be controlled independently for RX and TX (depends on controller). This Stack Match works with Mono-band antennas as well as Sri-band and Multi-band antennas!
Using
- Three outputs from one input
- Also works with two outputs from one input
- All combinations are possible
- Antenna Stack or Multi Beaming
Main functions
- Three outputs from one input (also Two outputs from one input)
- Status LED indicators
- Our own cores with low loss
- QRO64-61 for power up to 3kW
- QRO64-2D-61 for power up to 5kW
- High quality PCB thickness 2 mm
- Power consumption < 3 W
- High quality ATC RF capacitors
- High quality connectors
- Aluminium shield enclosure with holder
- Aluminium mounting holder with bracket
- AL box size 222x145x75 mm
- Stainless screws
- ASSEMBLED and TESTED VERSION
Parameters
- Low insertion loss
- Impedance matching compromise for 2 or 3 antennas
- Frequency range: 1.8 MHz to 30 MHz (could be made for 6m too)
- Power rating MP < 3kW and HP < 5kW. Normal CW, SSB, RTTY DX operation. In contest mode: CW, SSB 75% and RTTY 50% of HF power
Available as
ASSEMBLED: ready to use
PCB: only PCB
Connectors: PL SO-239 or N or 7/16 (female with gold plated and PTFE)
Included in package
Stack match assembled and tested
Mounting holder with bracket - image
Manual
If you want to know more please check our wiki with Stack Match 1-3 manual.
version with PL SO-239 connectors
version with 7/16 connectors
version with N connectors
stack match 1-3 medium power version
stack match 1-3 high power version
This Stack Match can be controlled by our Easy Controller
Data sheet
- type
- ASSEMBLED
- design
- in enclosure
- usage
- RX + TX
- impedance
- both 50 & 75 Ohm
- front-end protection
- none
- frequency range
- DC to 60 MHz
- product dimensions
- 222x145x75 mm - al box IP65
- PCB dimensions
- 170x100 mm
- product weight (brutto)
- 2.25 (MP), 2.37 to 2.62 (HP) kg
- package dimensions
- 26x23x21 cm
Specific References
- ean13
- 1000090100870
You may also like
199.65 €
(tax incl.)
This is Easy Controller for antenna stack match with 3 (2) outputs. You can control any stack match with 4 wires. There are 7 combinations. Including PTT hot switch protection. You can choose between two versions:...