95.59 €
(tax incl.)
Small 8 relay DIN rail module. Can be controlled by H or L level. Directly compatible with Easy Controller.
DIN Relay module 16 x 5A
DIN rail relay module 16 x 5A 12V DC control
101.64 €
(tax incl.)
101.64 €
84.00 € (without tax)
84.00 € (without tax)
Add to compare0
Love
Add to wishlist
This is a simple DIN rail module with 16 small 5A relays. The relay has only one (Now Open) switching contact and all 16 relays have one common COM port. The relays are wired as a switch with 16 outputs with one common center. Likewise, the control voltage has a common port (SS) as ground. The relay control is by 12V DC with led indication.
Using
- External relays for Easy Controllers
- Switching higher currents
- Relay with one NO contact
- DIY relays for your CPU module
Main functions
- 16 relay with one contact (NO)
- Small relays in sockets
- Control +12V
- Relay max. current 5A
- DIN rail module
- LED indication
Parameters
- Control voltage +12V DC (X)
- One contact in relay: Now Open
- Relay current: min. 10mA, max. 180mA
- No protection diode at coil!
- Relay Panasonic APAN3112
- Max. switching current 5A
- Max. switching voltage 250VAC
- Max. switching capacity 1250VA, 150W
- See data sheet in attachments section
- Module size: 10.5x8x4 cm
Available as
ASSEMBLED: ready to use
Included in package
16 relay module assembled and tested
Data sheet
see our Attachments section.
⚠ IMPORTANT NOTE: Relays are able to switch 250V AC - please observe the safety regulation for working with 230V. This is a life-threatening voltage. If you want to use these relays to switch equipment on 230V, check the surge currents or limit them. Due to inrush currents, which can be many times higher than the operating current, the relays contacts can be damaged.
There is no protection diode on the relay coil. In the case of switching with semiconductor components, optimize the wiring - add a diode for the reverse voltage leakage.
You may also like
