3-way small splitter KIT
The splitter or combiner is a very useful device. It can provide equal voltages, equal current, or equal power to matched or unmatched loads.
23.00 € (without tax)
This 3-way small splitter is a very useful device. It can provide equal voltages, equal current, or equal power to matched or unmatched loads. Like all passive splitters and combiners, this device is less than ideal. Isolation is maximum only when at least one port are properly terminated. In this case isolation between the three splitted/combinated ports is maximum when the main port is properly terminated. This HW is designed only for RX line. Both impedances 50 or 75 Ohm can be selected by the jumper.
Using
- Antenna combiner - 3 el broad side array
- RX signal divider
- 10 MHz signal splitter
- One antenna to three RX
Main functions
- Broadband: 0.1 MHz to 60 MHz
- 3-way Splitter or Combiner
- Low loss
- 50 / 75 Ohm impedance - easy jumper switch
- Quality SMA connectors
- KIT VERSION
Parameters
- Impedance 50 or 75 Ohm
- Insertion loss: around 1 dB
- Split 4.8 dB, together with IL around 5.8 dB
- Isolation more than 18 dB for middle port and more than 23 dB for 1st and 3rd port
- SWR on splitted ports better than 1 : 1.15 on HF, resp. 1 : 1.25 on 6m
- SWR on main port around 1 : 1.3 on HF, resp. 1 : 1.4 on 6m
Available as
KIT: all parts + PCB
KIT with BOX: all parts + PCB - KIT VERSION
ASSEMBLED: ready to use - ASSEMBLED VERSION
ASSEMBLED with BOX: all parts + PCB - ASSEMBLED VERSION
PCB: only PCB
KIT contains
- PCB
- SMA connectors
- binocular cores
- resistors
- capacitors
- pin header, jumper
- Cu wire
- silicone sleeving
Manual
If you want to know more please check our wiki with 3-way small splitter manual.
RX antenna splitter for the three RX
RX antenna combiner for 3el Beverage array
Input/Output to port 1
Input/Output to port 2
Input/Output to port 3
Isolation port 1 to 2
Isolation port 1 to 3
Isolation port 2 to 3
Port 2 to Input/Output
Port 3 to Input/Output
Data sheet
- type
- KIT
- design
- pcb module
- usage
- RX
- impedance
- both 50 & 75 Ohm
- front-end protection
- none
- frequency range
- 0.1 MHz to 60 MHz
- PCB dimensions
- 50x50.4 mm
- product weight (brutto)
- 0.09 kg
- package dimensions
- 12x10.5x4.5 cm
Specific References
- ean13
- 1000090105301
Leave a review