

K9AY simply VAR/FIX
OLDER VERSION - new and fully functional device with THT components
45.00 € (without tax)
This K9AY is terminated loop. It consists of a wire loop of any convenient shape (diamond, delta etc.), hung from a single support and with a ground rod at the bottom. A 9:1 impedance-matching transformer is connected from one end for the loop to the ground and terminating resistor is connected the other end of the loop to the ground. This antenna is directional. Favoring signals are arriving from the feed point end. There, with the two loops, you can switch between four directions. You can also change the antenna far field by changing the RLOAD (RTERM) of the loop.
Using
- Lower noise RX antenna
- RX antenna designed for FOUR directions
- Small design
- Ideal for portable operation
- Noise source antenna for QRM eliminator
Main functions
- Broadband - 0.2 to 30 MHz
- 4 directions about 110 deg.
- Needs small room
- Great for portable operations
- 50 or 75 Ohm feed line - jumper switch inside
- Good for phasing more pics into the array
- Variable or Fixed load resistor
- Common-mode coax choke included
- ONLY FEEDER! WITHOUT CONTROLLER
- High voltage electrostatic protection with neon lamps
- High power IN/OUT protection with PTC
- Controlled by DC voltage (external wires) or AC/DC voltage over the coax feed line
- High quality connectors
- Stainless screws
- IP56 box - recommended to protect it against water
- Feeder size 100x100 mm
Parameters
- RX antenna - Gain depends on loop size
- Four directions about 110 degrees
- F/B depends on loop size and construction
- Find more design hints (phased array)
- Fixed or Variable termination resistor
- Feed line impedance 50 or 75 Ohm
- Common-mode choke isolation more than 30 dB
- Current protection > 100 mA and Voltage protection > 65 V
- Control AC/DC voltage 11 - 14 V
- Control AC/DC current < 200 mA
- Rload voltage DC about 1.5 to 6 V and 30 mA
Available as
VARIABLE or FIXED version
ASSEMBLED or KIT
Included in package
K9AY kit or assembled
Manual
If you want to know more please check the manual.
Data sheet
- design
- in enclosure
- usage
- RX
- impedance
- both 50 & 75 Ohm
- front-end protection
- input
- controller
- without controller
- product dimensions
- 100x100x50 mm - PU box IP56
- package dimensions
- 18.5x14x10.5 cm
Specific References
- ean13
- 1000090100511




