61.71 €
(tax incl.)
Small RX preamplifier module with 2N5109, bypass and variable gain.
Preamp BOX with 2N5109 SMD
RX preamplifier with variable gain, protections and power over coax.
90.75 €
(tax incl.)
90.75 €
75.00 € (without tax)
75.00 € (without tax)
Brand:
Add to compare0
Love
Add to wishlist
This RX Preamplifier module BOX with 2N5109 transistor is based on W7IUV design. You can use it as high IP preamplifier for RX antennas (beverage, DHDL, flag etc.). Gain is up to 18 dB and there is also build in variable ATT. You can easy set the gain as high as you need! As well you can set right transistor bias with multi turn potentiometer. Two relays offer bypass switching if there is no power supply voltage. You can use external power supply connected to the box or the bias tee box for power over the coax.
Using
- High IP RX preamplifier - RX antennas
- RX ANT preamp powered over coax
- Buffer amplifier
- Driver amplifier
Main functions
- Broadband: 0.1 MHz to 30 MHz
- Very high IP3
- Gain up to 18 dB
- High output power up to 26 dBm
- Variable ATT for gain 0 to 18 dB
- Bypass relays
- Front-end diode protection - ON/OFF by jumpers
- Power over coax with the Bias Tee BOX
- You can set transistor bias as you need by trimmer
- High quality relays with TWO contact parallel
- High quality connectors
- IP56 box - recommended to protect it against water
- Feeder size 100x100 mm
- ASSEMBLED AND TESTED VERSION
Parameters
- Supply voltage 12 - 15 V
- Power directly or over the coax - bias tee - voltage 12 - 15 V
- Supply current up to 180 mA include relays!
- Gain up to 18 dB
- REAL IP3 37 dBm for 18 V / 90 mA - more info on my BLOG
Available as
ASSEMBLED: ready to use
ASSEMBLED THT version: ready to use - ASSEMBLED VERSION (only F connector)
KIT THT version: all parts + PCB and IP56 box - KIT VERSION
Connectors: PL SO-239 or F (only THT version)
PCB THT version: only PCB
Included in package
Preamp assembled and tested
Manual
If you want to know more please check our wiki with Preamp Box manual.
version with PL SO-239 connectors
RX Preamp BOX with Bias Tee BOX
 |
Gain 50 kHZ to 1 MHz
 |
Gain 1 MHz to 70 MHz
 |
Input SWR, S11
 |
Data sheet
- type
- ASSEMBLED
- design
- in enclosure
- usage
- RX
- impedance
- both 50 & 75 Ohm
- front-end protection
- input and output
- frequency range
- 0.1 MHz to 30 MHz
- product dimensions
- 100x100x50 mm - PU box IP56
- PCB dimensions
- 95x95 mm
- product weight (brutto)
- 0.34 (PL) kg
- package dimensions
- 18.5x14x10.5 cm
Specific References
- ean13
- 1000090114679
You may also like
55.66 €
(tax incl.)
The RX small preamp is very simply low noise preamplifier module with 2SC5551 transistor based on W7IUV design. Use it as high IP preamplifier for RX antennas, buffer amplifier or small driver.
61.71 €
(tax incl.)
The RX small preamp is very simply low noise preamplifier module with 2SC5551 transistor based on W7IUV design. Use it as high IP preamplifier for RX antennas, buffer amplifier or small driver.
89.54 €
(tax incl.)
RX preamplifier with variable gain, protections and power over coax.
36.30 €
(tax incl.)
Small RX preamplifier module with 2N5109, bypass and variable gain.
16.94 €
(tax incl.)
RX preamplifier with variable gain, protections and power over coax.
76.23 €
(tax incl.)
A bias tee is used to insert AC or DC power into an HF signal to power remote antenna preamplifiers (DC), Bi-directional beverages (AC) or other devices.
75.02 €
(tax incl.)
A bias tee is used to insert DC power into an HF signal to power remote antenna amplifiers or other devices.
50.82 €
(tax incl.)
RX preamplifier with variable gain, protections and power over coax.