VHF/UHF/LNB Bias Tee ENC in BOX
Universal VHF/UHF/LNB Bias Tee ENC in box which is designed for Low Noise Amplifiers, buffer amps, LNB etc.
54.00 € without tax
This universal VHF/UHF/LNB Bias Tee in box is designed for Low Noise Amplifiers, buffer amps, LNB etc. Including protections at RF and also DC path. Variable Attenuator allows you to reduce signal when LNB or preamp has to high gain. RF limiter and resettable fuse protects against strong signals (transmitting into device). LED indicators show DC voltage ON and also when the voltage is over 18 V, LED indicates it. In the case of LNB it means switching from V-pol to H-pol.
- Frequency range: 50 to 1000 MHz
- For receiving chain only
- Designed for: LNB, LNA, buffer amplifiers etc.
- RF limiter protections for both IN/OUT
- Variable Attenuator
- DC voltage short protection (resettable)
- LED indication (ON and H-pol for LNB)
- 4pcs self adhesive feet pads included
- DC plug included
ASSEMBLED in BOX: ready to use
Included in package
Bias Tee assembled and tested
DC plug - image
4pcs self adhesive feet pads - image
If you want to know more please check our wiki with VHF/UHF/LNB Bias Tee ENC manual.
|Frequency range||50 to 1000 MHz|
|Insertion loss||typ. 3 dB (ATT to min.)|
|Impedance||50 or 75 Ohm|
|DC voltage||+9 to +24 V DC|
|DC voltage for LNB||+12 V for Vertical polarization
>18 V for Horizontal polarization
|DC current||max. 500 mA (el. fuse)|
|Variable Attenuator||0 dB to NO signal|
|RF F connector||input + bias tee voltage|
|RF SMA connector||output, DC isolated|
⚠ IMPORTANT NOTE: This device is for the receiving chain only. Unlike other Bias Tees on the market, it includes an RF limiter to protect your RX from strong signals.
Bias Tee block diagram
- in enclosure
- both 50 & 75 Ohm
- frequency range
- 50 to 1000 MHz
- product dimensions
- 58x50x24 mm - al box
- product weight (brutto)
- 0.13 kg
- package dimensions
- 14.5x9.5x9.5 cm